While the display is blank, press the f10 key to enter the BIOS settings menu. The BIOS settings menu is accessible by pressing the f2 or the f6 key on some computers. After opening the BIOS, go to the boot settings. For notebook PCs: select the Storage tab, and then select Boot Options.
Índice de contenidos
How do I open BIOS settings?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
Turn on/restart the HP laptop. Press Esc or F10 to enter BIOS settings menu when you see the HP boot menu.
How do I change BIOS settings on my laptop?
How to Configure the BIOS Using the BIOS Setup Utility
- Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
- Use the following keyboard keys to navigate the BIOS Setup Utility: …
- Navigate to the item to be modified. …
- Press Enter to select the item. …
- Use the up or down arrow keys or the + or – keys to change a field.
How do I get into BIOS without UEFI?
shift key while shutting down etc.. well shift key and restart just loads the boot menu, that is after the BIOS on startup. Look up your make and model from manufacturer and see if there may be a key to do it. I do not see how windows can prevent you from entering your BIOS.
How do I get to HP Advanced BIOS settings?
Turn on the computer, and then immediately press the Esc key repeatedly until the Startup Menu opens. Press F10 to open the BIOS Setup Utility. Select the File tab, use the down arrow to select System Information, and then press Enter to locate the BIOS revision (version) and date.
How do I enter the BIOS on an HP laptop?
Turn on or restart the computer. While the display is blank, press the f10 key to enter the BIOS settings menu. The BIOS settings menu is accessible by pressing the f2 or the f6 key on some computers.
What is boot key for HP?
While the display is blank, press the f10 key to enter the BIOS settings menu. The BIOS settings menu is accessible by pressing the f2 or the f6 key on some computers. After opening the BIOS, go to the boot settings.
How do I reset my BIOS settings?
Restart the computer. Press and hold the CTRL key + ESC key on the keyboard until the BIOS Recovery page appears. On the BIOS Recovery screen, select Reset NVRAM (if available) and press the Enter key. Select Disabled and press the Enter key to save the current BIOS settings.
How do I change my BIOS to UEFI mode?
Select UEFI Boot Mode or Legacy BIOS Boot Mode (BIOS)
- Access the BIOS Setup Utility. Boot the system. …
- From the BIOS Main menu screen, select Boot.
- From the Boot screen, select UEFI/BIOS Boot Mode, and press Enter. …
- Use the up and down arrows to select Legacy BIOS Boot Mode or UEFI Boot Mode, and then press Enter.
- To save the changes and exit the screen, press F10.
How do I save my BIOS settings?
To save changes, locate the Save Changes and Reset option on the Save & Exit screen. This option saves your changes then resets your computer. There’s also a Discard Changes and Exit option. This is for if you make a mistake or decide you don’t want to change your BIOS settings at all.
How do I enter UEFI mode?
To boot to UEFI or BIOS:
- Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. …
- Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.
What is UEFI mode?
The Unified Extensible Firmware Interface (UEFI) is a specification that defines a software interface between an operating system and platform firmware. … UEFI can support remote diagnostics and repair of computers, even with no operating system installed.
Why is my BIOS not showing up?
You may have selected the quick boot or the boot logo settings accidentally, which replaces the BIOS display to make the system boot faster. I’d most probably try to clear the CMOS battery (removing it and then putting it back in).
