Try just restarting the computer. Sometimes it is all you need. B. Change the BIOS (aka Aptio Setup Utility) to its default settings and then restart the computer.
Índice de contenidos
Why does BIOS utility EZ Mode appear?
It’s also possible it’s stuck in BIOS mode because the hard drive is dead or dying, so look for it in BIOS setup under Storage devices to see that it’s still functioning. If not you’ll need to reseat it, adjust or change the cable, etc. to get it recognized, or replace the hard drive and reinstall WIndows.
How do I bypass UEFI BIOS utility?
Enter UEFI Setup to enable CSM or Legacy BIOS. Press “Del” when the ASUS logo appears on the screen to enter the BIOS. Press “Ctrl-Alt-Del” to restart the computer if the PC boots to Windows before loading the setup program. If this fails then I would reinstall to avoid future problems.
How do I get into BIOS utility advanced mode?
Select Troubleshoot from the menu, and then click Advanced Options. Click UEFI Firmware Settings, then select Restart. The system will now boot into the BIOS setup utility. To open the Advanced Startup settings in Windows 10, open the Start Menu and then click on Settings.
How do I get out of BIOS utility EZ mode?
webworkings
- In the Aptio Setup Utility, select the “boot” menu and then select “Launch CSM” and change it to “enable”.
- Next select the “Security” menu and then select “secure Boot Control” and change to “disable”.
- Now select “Save & Exit” and press “yes”.
How do I get out of BIOS setup?
Press the F10 key to exit the BIOS setup utility. In the Setup Confirmation dialog box, press the ENTER key to save the changes and exit.
How do I adjust BIOS settings?
How to Configure the BIOS Using the BIOS Setup Utility
- Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
- Use the following keyboard keys to navigate the BIOS Setup Utility: …
- Navigate to the item to be modified. …
- Press Enter to select the item.
How do I boot up in safe mode?
From Settings
- Press Windows logo key + I on your keyboard to open Settings. …
- Select Update & Security > Recovery . …
- Under Advanced startup, select Restart now.
- After your PC restarts to the Choose an option screen, select Troubleshoot > Advanced options > Startup Settings > Restart.
What is UEFI mode?
The Unified Extensible Firmware Interface (UEFI) is a publicly available specification that defines a software interface between an operating system and platform firmware. … UEFI can support remote diagnostics and repair of computers, even with no operating system installed.
How do I get out of UEFI boot mode?
How do I disable UEFI Secure Boot?
- Hold down the Shift key and click Restart.
- Click Troubleshoot → Advanced options → Start-up Settings → Restart.
- Tap the F10 key repeatedly (BIOS setup), before the “Startup Menu” opens.
- Go to Boot Manager and disable the option Secure Boot.
How do I change RAM speed in UEFI BIOS?
Try setting your ram manually instead of using XMP.
- In the bios reset to defaults (F5)
- Set the AI Overclock Tuner to Manual.
- Scroll down to Dram Frequency and select 3000MHz.
- Scroll down to Dram voltage and enter in 1.35v.
- Scroll down to CPU System Agent voltage and enter in 1.20v.
How do I get UEFI BIOS utility?
How to access UEFI (BIOS) using Settings
- Open Settings.
- Click on Update & Security.
- Click on Recovery.
- Under the “Advanced startup” section, click the Restart now button. Source: Windows Central.
- Click on Troubleshoot. …
- Click on Advanced options. …
- Click the UEFI Firmware settings option. …
- Click the Restart button.
How do I use UEFI BIOS utility?
To boot to UEFI or BIOS:
- Boot the PC, and press the manufacturer’s key to open the menus. Common keys used: Esc, Delete, F1, F2, F10, F11, or F12. …
- Or, if Windows is already installed, from either the Sign on screen or the Start menu, select Power ( ) > hold Shift while selecting Restart.
How do I enter BIOS?
In order to access BIOS on a Windows PC, you must press your BIOS key set by your manufacturer which could be F10, F2, F12, F1, or DEL. If your PC goes through its power on self-test startup too quickly, you can also enter BIOS through Windows 10’s advanced start menu recovery settings.
