Resetting the BIOS configuration to the default values may require the settings for any added hardware devices to be reconfigured but will not affect the data stored on the computer.
Índice de contenidos
Is it safe to reset BIOS?
It is safe to reset the BIOS to default. … Most often, resetting the BIOS will reset the BIOS to the last saved configuration, or resets your BIOS to the BIOS version that shipped with the PC. Sometimes the latter can cause issues if settings were changed to take account for changes in hardware or OS after install.
Will resetting the BIOS erase data?
Resetting the BIOS does not touch data on your hard drive. … A BIOS reset will erase BIOS settings and return them to the factory defaults. These settings are stored in non-volatile memory on the system board. This will not erase data on the system drives.
Should I reset BIOS to default?
For most users, BIOS issues should be uncommon. However, you may need to reset your BIOS settings to diagnose or address other hardware issues and to perform a BIOS password reset when you’re having trouble booting up.
What is BIOS default settings?
Your BIOS also contains a Load Setup Defaults or Load Optimized Defaults option. This option resets your BIOS to its factory-default settings, loading default settings optimized for your hardware.
How do I reset my BIOS back to default?
Reset the BIOS to Default Settings (BIOS)
- Access the BIOS Setup utility. See Accessing BIOS.
- Press the F9 key to automatically load the factory default settings. …
- Confirm the changes by highlighting OK, then press Enter. …
- To save the changes and exit the BIOS Setup utility, press the F10 key.
How do I reset my bios to factory settings?
Reset from Setup Screen
- Shut your computer down.
- Power your computer back up, and immediately press the key that enters the BIOS setup screen. …
- Use the arrow keys to navigate through the BIOS menu to find the option to reset the computer to its default, fall-back or factory settings. …
- Restart your computer.
What does resetting CMOS battery do?
Resetting your CMOS by reseating the CMOS battery
This battery allows the volatile CMOS memory to stay powered even when the computer is disconnected from an outlet. By removing and replacing the battery, you’ll erase the CMOS, forcing a reset.
Can you reinstall BIOS?
You can also find manufacturer-specific BIOS flashing instructions. You can access the BIOS by pressing a certain key prior to the Windows flash screen, usually F2, DEL or ESC. Once the computer has been rebooted, your BIOS update is complete. Most computers will flash the BIOS version during the computer boot process.
Is it possible to delete BIOS?
Well on most computer motherboards it is possible yes. … Just remember that deleting the BIOS is pointless unless you want to kill the computer. Deleting the BIOS turns the computer into an overpriced paperweight since it is the BIOS that allows the machine to start up and load the operating system.
How do I fix corrupted BIOS?
According to users, you might be able to fix the problem with corrupted BIOS simply by removing the motherboard battery. By removing the battery your BIOS will reset to default and hopefully you’ll be able to fix the problem.
How do I change BIOS settings?
How to Configure the BIOS Using the BIOS Setup Utility
- Enter the BIOS Setup Utility by pressing the F2 key while the system is performing the power-on self-test (POST). …
- Use the following keyboard keys to navigate the BIOS Setup Utility: …
- Navigate to the item to be modified. …
- Press Enter to select the item. …
- Use the up or down arrow keys or the + or – keys to change a field.
What is the difference between BIOS defaults and factory settings?
You can go ahead and select either Factory settings or BIOS defaults. The factory settings will reset the BIOS back to the most recent known BIOS set up. The Factory setting will push it back to how it when the unit was shipped from factory.
How do I enter BIOS?
To access your BIOS, you’ll need to press a key during the boot-up process. This key is often displayed during the boot process with a message “Press F2 to access BIOS”, “Press <DEL> to enter setup”, or something similar. Common keys you may need to press include Delete, F1, F2, and Escape.
